I am trying to connect to a hostapd AP. The AP is a router (TP-LINK TALON AD7200) that is flashed to run OpenWrt firmware. When I run the command hostapd hostapd_wlan2.conf the output is:
root@TALON:/etc# hostapd hostapd_wlan2.conf Configuration file: hostapd_wlan2.conf Using interface wlan2 with hwaddr b0:4e:26:11:8f:f0 and ssid "TALON_AD7200" wlan2: interface state UNINITIALIZED->ENABLED wlan2: AP-ENABLED wlan2: STA 04:ce:14:07:47:d6 IEEE 802.11: associated wlan2: AP-STA-CONNECTED 04:ce:14:07:47:d6 wlan2: STA 04:ce:14:07:47:d6 IEEE 802.11: disassociated wlan2: AP-STA-DISCONNECTED 04:ce:14:07:47:d6 It disconnects after it tries to connect. I am trying to connect a laptop that runs Ubuntu 16.04 to the router. The content of the config file is:
ctrl_interface=/var/run/hostapd_wlan2 interface=wlan2 driver=nl80211 ssid=TALON_AD7200 channel=2 hw_mode=ad The AP does not have any encryptions.
What can be the problem?
1 Answer
The default distribution of ubuntu 16.04 doesn't implement the needed driver to communicate with dot11ad equipment.
You are left with two choices:
- Use an OS distribution that, by default, implements the wil6200 driver (e.g. Acer TravelMate)
- use another TALON AD7200 client
In case you choose option number 2, on the recent patched openwrt distribution that SEEMOO labs published, you do not need to configure your talon as an AP. Check the 60GHz leds, if they are flashing in both pieces of equipment, it means that you can establish a link. If not, reboot then again and again until you get it working.
I'm working with this hardware, feel free to contact me.
